Skip to product information
1 of 1

Pulse Tech

Battery Management Program Kit 3

Battery Management Program Kit 3

Regular price $1,411.70 USD
Regular price Sale price $1,411.70 USD
Sale Sold out

Part #: 746X203

Restore and Maintain: Keep 12V lead-acid batteries in seldom-used outdoor vehicles and equipment ready to go any time.

Unique Design: SolarPulse's higher-quality crystalline silicon cells pack more power per square inch and have longer life than standard amorphous "thin-film" solar cells. This uniquely designed solar panel is made of highly efficient proven crystalline silicon photo-voltaic cells, encapsulated by a clear polyurethane plastic coating, and mounted on a laminated aluminum substrate back plate that is less than 1/4" thick.

Durable and Powerful Performance: It is virtually indestructible and impervious to weather and age. The SP-3 charging system provides a full 3-Watts of power in a small durable size (4.7''L x 9.45''W x 0.25''H). For ultimate performance, it should be used on a single 12V lead-acid battery to replace the power loss from electrical accessories (that occurs even when the ignition is switched off) and to reverse naturally occurring sulfation buildup on the battery plates. The SP-3 is a higher-watt version of our SP-2 Solar Charger (2-Watt).

(1)    SC-2, 2-Station 12V Battery Recovery Charger
•    Patented Pulse Technology removes sulfate crystals and extends battery life
•    5 LED indicators per cable connection
•    Reverse polarity protected
•    Spark free operation
•    Works anywhere in the world with detachable IEC connector
•    Single switch operation
•    One-Year Limited Warranty

(1)    PRO-12-RP, 12-Station Battery Maintenance System
•    Low amperage patented desulfation pulse charge offsets normal discharge rate
•    Maintains up to twelve batteries in "factory fresh" condition indefinitely
•    Patented Pulse Technology reduces and prevents sulfation buildup
•    Audible alarm signals if cables are reversed
•    No sparkling between the leads
•    Completely safe – batteries cannot be overcharged
•    2-Year Limited Warranty

(1)    390PT, 6V and 12V Battery Tester
•    Determines state of charge, cold cranking amps (CCAs) and good/bad battery
•    Tests batteries IN or OUT of the vehicle
•    Tests 12-Volt and 24-Volt charging systems for proper operation
•    Tests discharged batteries down to 1.5-Volts
•    Handy QUICKSTART instruction guide print on the back so you can’t lose it
•    Displays battery voltage and battery capacity
•    Rugged shock resistant rubber “boot” to protect your investment
•    Selects from 6 languages:  English, Spanish, French, German, Italian and Portuguese
•    One-Year Limited Warranty

Model Name: Battery Management Program Kit 3
Model Number: BMP-3
Part Number: 746X203

The BMP-3 includes one SC-2, one PRO-12-RP and one 390PT


Electrical Characteristics
Input Electrical
Input Voltage: 110 - 240 VAC
Input Current: 2.5 Amps Max at 100 VAC (All outputs @6 Amps)
Input Frequency: 50 - 60 Hz
Output Electrical
Output Current: 6 Amps per Channel, 12 Amps Max
Output Voltage, Bulk Charge: 14.8 Volts
Min. Voltage for Startup: 4 Volts

Mechanical/Physical  Characteristics
Dimensions: 14.5" x 11.75" x 6.25"
Weight: 10 lbs.
Shipping Weight:  12 lbs.
Enclosure: Black HPX Plastic
Battery Cable Length: 96" - 14 AWB from box to battery clamps

Operating Temperature:  0°F to 130°F (-18°C to 54°C)
Storage Temperature:  0°F to 150°F (-18°C to 66°C)

Battery Disconnected
Bad Battery
Recovery Charge
Pulse Charge
Charge Complete
Reverse Polarity
Temperature Shutdown

One-Year Limited Warranty


Electrical Characteristics
Input Electrical
Input Voltage: 100-240 VAC
Input Current: 140 mA Max
Input Frequency: 50 – 60 Hz
Output Electrical
Number of outputs: 12
Output Current: 750 mA
Output Voltage, Bulk Charge: 14.7 V
Min. Battery Voltage for Startup: 11.5-Volts

Mechanical/Physical Characteristics
Dimensions: 7.25"L x 2.25"W x 1"H
Weight: 2 lbs
Shipping Weight: 4.3 lbs
Box-to-Clamps Wire Length: 72"

Operating Temperature: 0°F to 130°F (-18°C to 54°C)
Storage Temperature: 0°F to 150°F (-18°C to 66°C)

Safety and Compliance
CE Compliant

Two-Year Limited Warranty


Electrical Characteristics
    Rating System: SAE, DIN, EN, IEC, JIS Battery No.
    Operation Range: 40 to 2000 CCA (SAE)
    Minimum Battery Voltage for Analysis: 1.5V
    Voltmeter Range: 1.5V to 30V
    Internal Batteries: 1 Each 9 Volt

     2 Lines 16 Character LCD Decision Readout of:
        1. Good & Pass
        2. Good & Recharge
        3. Recharge & Retest
        4. Bad & Replace
        5. Bad Cell & Replace
    State-of-Charge (SOC) Displayed as a Percentage
    State-of-Health (SOH) Displayed as a Percentage

Mechanical / Physical Characteristics
    Dimensions: 7.8" L x 4.5" W x 2.1" H (198mm L x 114mm W x 53mm H)
    Weight: 1.40 lbs. (0.64 Kg)
    Shipping Weight: 1.78 lbs. (0.807 kg) Each
    Battery Cable Length: 2.62’ (80 cm)

    Operating Temperature: 32°F to 122°F (0°C to 50°C).

View full details


The secret to our success is our patented pulse waveform, which removes and prevents the buildup of lead-sulfate deposits on battery plates. That primes the battery to accept and store maximum power.

Long trusted by the military, our tech is ideal for anyone who wants to get more out of their equipment.